Runtime
Capturing Calculated results
When Interim results are capture on ARs and WSs the final results calculation is done automatically
Worksheet wide. Correction Factors
Apply wide
It is convenient, reduce human error and faster capturing say a single Blank Correction or Dilution Factor applicable to multiple Samples in the same run, only once, and adjust their results accordingly. For that purpose collect them on a Worksheet
Configure the Calculation
In this example we have to correct all the calculated ADF Fibre results with a Blank Correction determined earlier. Routine feeds samples are dried in paper bags and an empty bag is put through the same process to determine the factor, 0.97 here
When defining the Interim fields for these factors, be sure enable them to be applied Worksheet Wide, and set an appropriate default value for it
|
The ADF Fibre formula looks like this:
Analysis Services
Be sure the ADF Fibre Analysis Service inherits the Calculation
|
Capturing Results and factoring them
With Analyses created for these Services are grouped on a Worksheet, the Correction Factor is offered for optional Worksheet wide application. Individual results may still be adjusted too
After the interim weights were captured, most likely weighed in directly from a balance, the 0.97 Blank Correction applied Worksheet wide automates 99% of the ADF Fibre results
|
Ingozi